RangeXTD Manual: Quick Start Setup Guide

A RangeXTD devices are easy to setup. You have to just connect it to the router, log in to its interface to configure the device. Here, you will see full RangeXTD Manual, which will guide you through all the setup process.

RangeXTD Booster Setup

There are simple steps to complete the connection between the RangeXTD booster and your home router. Have a look them;

• Plug in the extender or booster near to the router in a wall socket.
• Press the router WPS button first and press the same button on the RangXTD booster.
• The devices will connect automatically with each other.

Now, you have to configure it through RangeXTD login, which you can do with computer or laptop;

RangeXTD Booster Login

• Connect computer to the extender or booster via SSID username or LAN cable.
• After that open the web browser in computer and type the IP address 192.168.7.234.
• Search it by pressing the Enter button and you will reach to the login page.
• Here, you must enter the username and password which are given in the user manual.
• Type in and click on the Login button, you will access the interface where you can adjust its settings.

Now, let’s see how you can update the RangeXTD booster firmware using some of the instructions;

RangeXTD Firmware Update

To update the firmware of your RangeXTD booster, you have to access the interface window and follow these below given steps;

• Connect computer and access the interface using 192.168.7.234 IP.
• Select the Advanced settings and click on the Firmware Update tab.
• Here you just have to click on the Update option in the bottom.
• After the update, the device will restart for once.

Now, have a look at some more steps that will help you to change the WiFi password of RangeXTD booster.

RangeXTD WiFi Password Change

You have to access the RangeXTD interface first from your computer and follow below given instructions;

• Access the interface, and go in to the Advanced tab.
• Select the wireless settings and click on the Change Password.
• Here enter your new password (you can also change the SSID username).
• Then, Save all the changes you have made.

You can also setup your RangeXTD extender or booster as an Access Point, let’s see how you can do it;

RangeXTD Setup in AP Mode

For setup the RangeXTD extender in AP mode, you have to connect it to the router via Ethernet cable;

• Toggle the booster mode selector button to the Access Point mode.
• Plug in the extender or booster in the wall socket and turn it on.
• Now simply, connect computer to it and access the interface using 192.168.7.234.
• Here, you can adjust the settings.

Conclusion

Here, you have learned about RangeXTD manual, which explain you how to setup, login, update, change password, and set it up in AP mode.