How to Connect RangeXTD WiFi Extender to Virgin Router?

There are many extenders that you connect with your home network easily and increase network coverage area. The current famous one is RangeXTD extender. Here, you will get to learn how to connect RangeXTD WiFi extender to Virgin router via RangeXTD login.

Connect Virgin Router

The Virgin Media hub connects in your home network as a modem as well as router. If you are connecting a range extender to the Virgin router then you should set it up as aWiFi router, just turn off the Modem mode from interface.

1. Turn on the Virgin media router and connect a computer to it via cable or SSID.
2. Search the IP address 192.168.0.1 on the web browser and reach to the interface login page.
3. Here, you must enter the username and password, and then click on the Login button.
4. You’ll reach to the interface window, here go into the Management tab and turn off the Modem mode.

Now, you can connect the RangeXTD extender easily with the WPS button or LAN cable. Have a look how to do that:

Start RangeXTD Extender Setup

You have to turn on the extender by plug it into a working power socket. Then, you must connect it to the Virgin router, you can do it with or without using any cable;

With Cable

The LAN cable should be used to the link the extender to the router. Connect one end of it to the router LAN port and other to the extender Ethernet port.

Without Cable

The Virgin router has a WPS button as well, and can connect to any extender without using any wire or cable. Just power on both devices and press the WPS button on both the devices. The network will automatically connect after some minutes.

Now, you can start the login and configuration step to end or finish the setup, below in the section, you will get to know how to do it:

End RangeXTD Extender Setup

You have to connect any computer or laptop to the extender network and open the updated browser in it.

1. Enter the IP address 192.168.7.234 in the web browser and search it by pressing the Enter button.
2. You’ll reach to the web-based interface where you must type in the username and password (given on label or user manual).
3. By using the credentials, you will get into extender interface window, where you can adjust all the settings and networks.

The End Thoughts

Here, in this blog post, you have learned about how to connect RangeXTD WiFi extender to Virgin router.