How to Connect RangeXTD Booster to Nighthawk RS300 Router?

It is pretty easy to connect the RangeXTD booster with the already set up Nighthawk RS300 router device. There are basically two main methods to pair the devices in minutes: Via RangeXTD app and other is Web-based interface. But first, let’s see why you should connect them.

Why Pair RangeXTD with the Nighthawk RS300?

The Nighthawk RS300 is one of the most powerful Wi-Fi 6 routers on the market. It’s built for speed, stability, and heavy-duty streaming. But even with all that horsepower, your router can only do so much on its own. If you’ve got a large home, thick walls, or just dead zones in the garage or backyard, the signal won’t always reach.

That’s where the RangeXTD Booster comes in. It grabs your router’s signal and rebroadcasts it, boosting coverage and eliminating dead zones. And when paired with a high-performance router like the RS300, you’re unlocking Wi-Fi on a whole new level.

Connect RangeXTD to Nighthawk RS300 Router

There are two main ways to connect your RangeXTD to the Nighthawk RS300:

1. Via the RangeXTD app
2. Through the Web Interface

Method 1: Using the RangeXTD App

If you’re into convenience, this is the route for you. The RangeXTD app is slick, intuitive, and actually does most of the thinking for you.

• A smartphone with the RangeXTD app installed (iOS or Android)
• Your Nighthawk RS300 Router already set up and broadcasting
• The RangeXTD plugged in and powered on (ideally halfway between the router and your weak signal area)

Download & Launch the RangeXTD app

1. Search “RangeXTD app” in the App Store or Google Play, and install it.
2. Open the app and log in using your Netgear account (create one if needed).

Detect Your Network

1. The app will automatically detect your Nighthawk RS300 router.
2. Make sure your phone is connected to the router’s Wi-Fi when you start.

Plug in the RangeXTD

1. Plug the booster into a power outlet where the signal is still strong (halfway between the router and the dead zone works best).
2. Wait for the LED light to turn on. It usually flashes during setup.

Use the WPS Option

1. On the app, go to the settings menu and look for “Add Extender” or “WPS Setup.”
2. Now, press the WPS button on your Nighthawk RS300.
3. Within 2 minutes, press the WPS button on the RangeXTD.
4. If the connection is successful, you’ll see a solid LED on the booster.

Verify Connection

1. Your booster should now appear in the app as a connected device.
2. Test the signal in previously weak areas if the booster is in the right spot, you’ll see improved coverage.

Method 2: Using the Web Interface

Prefer the traditional route? No problem. You can connect the RangeXTD via the web setup interface, and it works just as well.

What You’ll Need:

• A laptop or PC with Wi-Fi
• A web browser (Chrome, Firefox, Safari, etc.)
• Your Nighthawk RS300 broadcasting as usual
• The RangeXTD plugged in and ready

Steps:

Connect to the RangeXTD’s Network

1. On your laptop, search for available Wi-Fi networks.
2. Look for something like “RangeXTD_EXT” and connect to it.

Open the Setup Page

1. Open your browser and type 192.168.7.234 in the address bar.
2. You’ll land on the RangeXTD setup wizard.

Choose ‘Repeater Mode’

1. When prompted, select “Repeater Mode” to extend your existing Wi-Fi.
2. The booster will scan for nearby networks.

Connect to Your Nighthawk RS300

1. Find your Nighthawk RS300’s SSID (Wi-Fi name) in the list.
2. Select it and enter your password to connect.

Set a New SSID

1. You can keep the same name as your main network, or add “_EXT” to differentiate the booster’s signal.
2. Click “Apply” to confirm.

Final Placement

1. Unplug the booster and move it to your desired location (ideally mid-point).
2. Plug it in and wait for the connection to stabilize (usually a solid LED).

Test & Enjoy

1. Try streaming or downloading in previously weak areas.
2. You should see a solid jump in signal strength.

Pro Tips for the Best Signal

• Avoid Obstacles: Keep the booster away from metal, microwaves, and thick concrete walls.
• Reboot Occasionally: Just like your router, the booster benefits from the occasional reboot.
• Update Firmware: Check both devices for firmware updates via the app or browser. It can fix bugs and improve performance.

The Conclusion

Hopefully, with the help of above given instructions, you have successfully connected the RangeXTD booster with your home Netgear Nighthawk RS300 WiFi router.

FAQs

How to Change the RangeXTD Booster Network Password?

Access the rangeXTD app or interface on your phone/laptop and go into the Wireless Settings. Here select the SSID and change the password. Make sure you SAVE the settings to apply the new password.

How to Reset the RangeXTD WiFi Range Extender?

Find the reset button on the device and press it with the help of pen or pin. Hold it for 10 seconds and release it. After that wait for the device to reboot.

How to Manage the RangeXTD WiFi Booster Settings?

Connect a computer or laptop with the device network and search the IP address 192.168.7.234 to reach the login page. Then, just enter the login password to access the RangeXTD range extender interface.