How to Connect RangeXTD Booster to Nighthawk RAXE500?
The RangeXTD WiFi booster connects with the Nighthawk router with the help of two simple methods: WPS (via button) and interface (via computer). After setting up your extender, we will provide troubleshooting tips and solutions to make the connection secure.
Setup Using WPS Connection
There is a WPS button on the hardware of the RangeXTD WiFi booster device, with which you can set up the extender without using any cable. Use these steps to connect the RangeXTD Booster to the Nighthawk RAXE500:
- Power on the extender and the nearby router, and locate the WPS button on the router as well as on the extender.
- Push the button once on both devices and wait for a connection to establish.
- After that, you can connect with the extended network via the host router’s SSID password.
Setup Using Web Browser
If WPS doesn’t work or isn’t available, you can usually set up the RangeXTD booster through a web browser.
Begin by placing the extender near your Nighthawk router initially and powering it on.
Connect to RangeXTD WiFi Network
Open the Wi-Fi settings on your computer. Select the default Wi-Fi network name (SSID) broadcast by the RangeXTD booster. Connect to this network. You might not need a password initially, or the default password might be in the RangeXTD’s manual.
Access the RangeXTD Setup Page
Open a web browser. In the address bar, type the default IP address of the RangeXTD booster. This is very commonly 192.168.7.234, but check your RangeXTD manual to confirm. Press Enter. This should take you to the RangeXTD login page.
You’ll be prompted to enter a username and password. The default credentials are often username: admin and password: admin.
Inside the interface, select the host router network and enter the password to connect the extender to it. On the next page, enter the WiFi name and password. Then click SAVE to create the network. The extender will restart, and then you can join the new extended network.
Hopefully, the RangeXTD booster connects with the Nighthawk RAXE500 router. Now, have a look at a few tips and solutions given below.
Troubleshooting Tips
Highest Compatibility
All WiFi extenders work with most routers, so it’s always a good idea to ensure basic compatibility. The RangeXTD extender should generally work with the Nighthawk RAXE500, as both support standard Wi-Fi protocols.
Optimal Placement
Spot of the RangeXTD booster is crucial for optimal performance. You should experiment with different locations to find the best balance between receiving a strong signal from your router and providing good coverage to the desired area.
Update Your Firmware
Ensure the Nighthawk RAXE500 and RangeXTD boosters have the latest firmware updates for best performance. You can usually update the Nighthawk firmware through its web interface or the Nighthawk app. To update the RangeXTD WiFi Range Extender, you have to use its interface. Follow the steps to update:
- Go into the web browser and access the interface via 192.168.7.234.
- Open the Firmware tab from the Settings and click the UPDATE or Check For Update button.
WiFi Network Name (SSID)
You might have the option to keep the same Wi-Fi network name (SSID) as your Nighthawk or create a new one. Using the same name allows for seamless roaming, but sometimes creating a separate name can help you identify the extended network. To create a different network other than the router’s network, access the interface.
- Go into the settings and click Wireless settings.
- Select the SSID and choose channels.
- Enter the network name and password.
- Then click SAVE to create the network.
The Summary
The RangeXTD WiFi extender connects with any compatible router, whether it has WPS support or not. In the above article, we have given a simple step-by-step RangeXTD booster to the Nighthawk RAXE500 router connection guide. We have also walked you through a few troubleshooting tips and solutions to make the setup error-free.
