How to Connect Rangextd Booster to Nighthawk RAX40 WiFi Router

Are you struggling with dropping of WiFi signal in certain areas of your home? Then you have come at the right place. Dead zones are frustrating sometimes especially when your main router is powerful like the Nighthawk RAX40, but your home’s layout or wall thickness gets in the way. That is where a booster like the RangeXTD comes in. Connecting the rangextd to your Nighthawk RAX40 WiFi router is not a complicated process.

In this guide, we will walk you through how to complete the rangextd set up, use the rangextd login and get everything synced with your Nighthawk system.

Step 1: Understand Your Devices

Before plugging anything in, first thing is to understand what each device does.

• The Nighthawk RAX40 is your main router. It controls all your internet traffic and spreads it wirelessly across your home.
• The RangeXTD booster catches that signal and repeats it, extending your coverage.

When they are paired correctly, they work in coordination so it is important that they are configured in the right way.

Step 2: Initial Setup and Placement of RangeXTD Booster

After unboxing your RangeXTD, plug it into a power outlet in between of your Nighthawk router and the area with weak WiFi signal. Do not place it too close or too far if you want it to catch a good signal from the router and rebroadcast it effectively. Once the lights are up then you are ready to begin with rangextd set up process.

Step 3: Connect to the Booster’s Network

Now, hold your laptop or phone:

• Open your WiFi settings.
• Look for a network name.
• Connect to it. No password is available at this stage usually

Once you are connected, your browser will automatically take you to the rangextd login page. If it does not do so then manually enter the IP address 192.168.7.234 or http://rangextd.local into the address bar of your browser. This will open the booster’s login page.

Step 4: Perform the RangeXTD Login

At this step you can officially start the setup process.

• On the rangextd login page, you will be instructed to enter a password. The default is often “admin” or found printed on the device.
• Once logged in, the rangextd set up wizard will guide you through the pairing process.

Choose “Repeater Mode” when asked what you want the device to do.

Step 5: Select and Sync with Your Nighthawk RAX40

The booster will now scan for nearby WiFi signals. When the list appears:

• Find your Nighthawk RAX40 network name (SSID).
• Click on it.
• Enter your Nighthawk WiFi password.

This enables the RangeXTD to start repeating the RAX40’s signal.

Once that is complete, you can rename the extended network as per your preference or can keep the default name.

Wait for the booster to reboot and this usually takes 1 to 2 minutes.

Step 6: Confirm Connection

Now, go back to your device’s WiFi settings and look for the extended network. Connect to it with the help of your main WiFi password. Once you are connected perform the test of signal strength. Go to the areas which have weak signal or no connection. You should notice a stronger and more stable signal because of Rangextd.

Step 7: Use the RangeXTD App (Optional)

If you want manage settings later on in simple way then download the rangextd app from your app store. The app gives you control over settings like:

• Network names
• Passwords
• Device reboot
• Signal strength mapping

It is not necessary but will help you definitely for an ongoing use.

Some Essential Tips

• If the signal is still weak then reposition the booster slightly closer to the router.
• Do not place the booster behind any furniture or inside cabinets line of sight helps.
• Once set up, you do not need to use the rangextd login page often but bookmark it just in case.

Conclusion

One of the simplest ways to reduce the dead zone at home is to connect a RangeXTD booster to a Nighthawk RAX40. Once you have completed the process of rangextd set up, you will get the benefit of smoother streaming, better video calls and a much more reliable internet connection throughout your entire space. Whether you use the rangextd app or go through the browser-based rangextd login, the process is beginner-friendly and does not require any technical know-how.

FAQs

What if I am unable to access rangextd login page?

Verify that you are connected to the booster’s WiFi network. If not possible then switch the networks. Also, try using the IP address 192.168.7.234 instead of the URL. Clearing your browser’s stored data can help too.

Can I use the rangextd app instead of manual setup?

Yes, the rangextd app can simplify setup and is ideal for non-tech users. It detects the booster and guides you through each step.

How do I reset my RangeXTD booster?

There is a small reset hole which is present on the side or bottom of the booster. With the help of paperclip hold the button for atleast 10 seconds till the time light flashes. This will reset all settings, including the rangextd login credentials.

Does RangeXTD support dual-band routers like the Nighthawk RAX40?

Yes, the rangextd is suitable for both 2.4GHz and 5GHz bands. Make sure you connect with the same band which is mostly used by your home devices.