Complete Guide to RangeXTD Installation for Your Home
There are just simple instructions that you can use to connect a RangeXTD Networking device to your home network. Have a look at from start to end process of RangeXTD installation in your home;
Establish Connection Between RangeXTD to Home WiFi
You have to connect the router to the RangeXTD extender or booster with the help of WPS button, have a look how to do it;
- Connect the extender to power by plugging it to the power outlet.
- Then press the WPS button on the router and press the same button on the extender.
- Both the devices will get connected to each other automatically and after that you can configure its settings easily.
You can configure it through your computer or laptop, just have a look how to do it;
Configure RangeXTD Network Device via Computer
Simply, connect computer or laptop to the RangXTD network via LAN cable or SSID name. Then, follow easy instructions;
For connection between the RangeXTD network and computer the password is nothing (just don’t fill any password key).
- Go in to the browser (which should be updated), type in the IP address 192.168.7.234.
- Search the IP by pressing the Enter button and you will reach to the login page of booster.
- Here, you have to enter the username and password, which are admin in both the fields.
- You will get to the interface page, where you can easily configure the settings of Booster.
Now, you have completed the RangeXTD installation or RangeXTD login interface process. You should also know about how you can connect this booster as AP mode with your WiFi.
Setup in AP Mode
To configure the RangeXTD extender or booster, you have to connect it with router via RJ45 (LAN) cable.
- Connect one end of the cable to the extender WAN port and other in the router (LAN port.
- Then toggle the Mode button to the start the AP mode.
- Power on the extender by plugging it in the power socket.
- Connect your PC with the network name ‘RANGEXTD’ and access the interface.
- To access the Web GUI, browse IP address 192.168.1.1.
- A Mode page will open up, where you have to select the AP mode.
- Fill the details and click on Apply button.
The End Lines
Here, you have seen and learned about how to complete the RangeXTD installation in your home. We have also added section about how to setup booster in AP mode.