RangeXTD WiFi Booster Not Working: Do This

Is your RangeXTD WiFi Booster not working properly? This blog is here to help. In this post, we’ll explore the common reasons why the RangeXTD WiFi Booster might not be working and provide easy solutions to fix it. WiFi boosters are devices designed to boost and extend your router’s WiFi signals. The RangeXTD WiFi Booster connects to your router using the WPS method or an Ethernet cable.

Reasons Why your RangeXTD WiFi Booster isn’t Working

• Your booster can be wrongly connected to the router or modem.
• The connection is made with the damaged cable between the modem and booster.
• The internet coverage is weak in your area of living.
• The firmware of RangeXTD WiFi booster device is out of date.

Here are the Solutions for RangeXTD WiFi Booster Not Working

Check Booster to Router Connection

You must check the booster is connected to router or not via WPS. If the network is down, then connect the booster again to the Home WiFi router. If the router as well is not showing the internet signal then check the cable connection between router and modem.

Check Ethernet Cable (if used) Connection

Check out the cable connection between the router and modem, which is connected through the Ethernet cable. If you are using Ethernet cable to connect the Make sure the cable is not damaged or it is not cut from anywhere. If you see any cuts on the cable, then replace the cable with a new.

Reboot RangeXTD WiFi Booster

One more troubleshooting tip is rebooting the RangeXTD WiFi booster. There simple steps given below;

• Find the power button on the device and press it twice to reboot the device.
• Plug RangeXTD WiFi booster out from the wall socket, and then plug it in again.

Reset RangeXTD WiFi Booster

You should also try resetting the booster by following some of the steps written down here;

• Find and press the reset button for 5-10 second if the reset is not started.
• The reset button can be pressed using a pin or sharp object or a pen.

Resetting the booster will clear all the data and delete all the settings. To configure the RangeXTD WiFi device again, you have to access the login 192.168.7.234 interface with your computer.

How to Log in to RangeXTD Booster?

• Connect you computer to the Booster network.
• Go in to a browser and search the IP address 192.168.7.234, which is RangeXTD login page web address.
• You will reach to the login interface page where you have to enter the default admin credentials.
• The main interface dashboard of the booster will show up, where you can easily adjust the settings after the reset.

In Conclusion

Here, in this above post, you have seen and read reasons and solutions that you can use to fix the RangeXTD WiFi booster not working or not connected to the internet.