How to Connect RangeXTD Booster to linksys MR9000 WiFi Router?

The RangeXTD WiFi Booster is affordable and powerful small gadget which is designed to reduce the frustrating dead zones in your home or office. If you have been experiencing weak WiFi signals in certain corners of your house including kitchen, backyard or that one guest bedroom then definitely you are not the only one. That is where the RangeXTD steps in to help. It works better when combined with a reliable router, like the Linksys MR9000, which is popular for its strong dual-band performance and wide coverage.

Now, if you are thinking that how to connect the RangeXTD Booster to your Linksys MR9000 router, then you are at the right track. In this guide we will go through understand this with simple steps that to without ny technical involvement.

Step-by-Step Guide to Connect RangeXTD Booster with Linksys MR9000

1. Unbox and Power On the RangeXTD

• Firstly make sure that the RangeXTD Booster is plugged in the working power socket somewhere near the Linksys MR9000 router.
• You have to wait until the power lights to turn solid. This may take about 30 to 60 seconds.

Tip: The setup process can’t be started until the lights become stable.

2. Connect to the RangeXTD Network

• Go to the wifi settings of your smartphone or laptop.
• Search for the network name like “RangeXTD_EXT” or similar.
• Tap on the network and connect with that and there will be no requirement of password.

3. Open the Browser and Visit the Setup Page

• Open your browser whether it is Chrome, Firefox or Safari.
• Type 192.168.7.234 or http://rangextd.com in the address bar of a browser.
• After that hit enter. The rangextd login page will appear on screen.
• You will be asked to enter a password which is usually “admin” if you have not changed it before.

This is the rangextd login step. Make sure that your device is still connected to the booster’s WiFi while accessing the page.

4. Start the RangeXTD Setup

• Once logged in, click “Repeater Mode” (also called extender mode).
• The booster will scan for nearby WiFi networks. Wait for your Linksys MR9000 network to pop up.
• Click on your Linksys SSID (WiFi name), then enter the password for it.

This is the actual rangextd setup stage where your booster is being paired to your main router.

Make sure your MR9000 router is broadcasting both 2.4GHz and 5GHz for best compatibility.

5. Placement and Final Check

• Once the setup is done make sure to unplug the booster and place it in between of your router and the area with weak wifi signal.
• Plug the booster again and wait for the lights to become stable.
• Now verify that your device is connected to the new extended WiFi signal.

Just like that your extender is now up and running properly.

The placement of a booster is essential. The good location of booster can really improve the signal.

Helpful Tips to Keep Things Running Smoothly

• Do not place booster behind the thick walls or metal objects because this can affect the signal strength.
• If asked then use the same password as your main network as this make switching between networks smoother.
• If the whole setup process fails then don’t hesitate to reset the booster with the use of paperclip. Hold it for 10 seconds.

Also, do not forget to log into the rangextd login page again if you ever want to change the settings, WiFi name or mode.

FAQs

Why can’t I access the rangextd login page?

You have to make sure that your device is connected to the RangeXTD WiFi. If not then the login page will not open. You can also try by 192.168.7.234 instead of rangextd.com.

What can be the reason if booster is not detecting Linksys MR9000?

Verify that your MR9000 is on and not hiding its SSID. Also, look that it should not be too far from the booster during rangextd setup.

Is it possible to use the booster on both bands (2.4GHz and 5GHz)?

Yes, the RangeXTD can extend both if your router supports dual-band. During the rangextd setup, you can choose one or both bands. The MR9000 supports both, so go ahead.

What to do if I forgot my rangextd login password?

You have to reset the booster using the small reset button. Hold it for 10 seconds until the lights blink. This will restore factory settings and you can go through the rangextd setup again.

Conclusion

Connecting your RangeXTD Booster to a Linksys MR9000 WiFi Router does not have to be technical. It requires a stable start which includes plug in the booster, open the browser, access the rangextd login and finish up the rangextd setup in just a few clicks. From there, just find a good spot for your booster and enjoy stronger WiFi where it used to slow.