How to Connect RangeXTD Extender to Linksys AC1300?

The extenders and boosters are simple to connect within les time. These devices provide fast and reliable network connection in home with multi-story. In this post, you will get to know about how to connect RangeXTD extender to Linksys AC1300 router device.

Check Linksys AC1200 Router Settings

You have to check the Linksys router settings from the interface of the AC1200 in your computer or laptop. In this section, you will get to know about how to access the router settings on the web and how to check settings.

• Connect the computer to the Linksys AC1200 router via cable or SSID network.
• Go into the web browser and search the URL Linksyssmartwifi.com or IP 192.168.1.1.
• You will get into the login page of the interface; here you must enter the admin password.
• By pressing the ENTER button you will get the access into the interface.
• Here, check the router settings, modes and others so that you can start the extender connection.

Now, after checking the settings, you can easily start the RangeXTD setup within your computer or laptop. So, let’s start the setup straight away.

RangeXTD Extender Setup

The setup will start with powering up the extender by plugging it in the wall socket near to the router devices in your home. Here, you have to follow some tips that will help you to start the error free setup.

• The extender plugged in the socket on optimal location near to the router.
• Wall outlet must be non-damage and ensure the socket is supplying power correctly.
• You can connect the extender to the router via two methods that are WPS and Cable method.

To connect, just press the router WPS first and then within two minutes press the button on the extender. Then, you must configure the extender device via your computer. Have a close look at the configuration method.

RangeXTD Extender Login

There are two methods that you can use to reach to login page and configure the extender device, let’s start.

IP Address

• Connect computer and open the web browser in it.
• Enter the IP address 192.168.7.234 in the address bar and search.
• You will get into the RangeXTD login page where you have to enter the username and password.
• After entering the credentials you will get into the interface of the device.
• Here, you can easily Connect RangeXTD extender to Linksys AC1300 router in home.

End of Words

The RangeXTD extender is one of the boosters that provides AP mode/repeater mode both in one device. Here, you have learned about how to connect RangeXTD extender to Linksys AC1300 within minutes.